Skip to content
WindowsAdvanced

0x000000BE – ATTEMPTED_WRITE_TO_READONLY_MEMORY: Causes and Troubleshooting Guide

Quick Answer The 0x000000BE – ATTEMPTED_WRITE_TO_READONLY_MEMORY error is a Windows Blue Screen of Death (BSOD) stop code that occurs when a driver attempts ...

BI
Bison Technical Team Enterprise IT specialists
Updated 13 min read 0 total views
Structured technical guidanceSafety notes included where requiredSources cited when applicable

Quick Answer

The 0x000000BE – ATTEMPTED_WRITE_TO_READONLY_MEMORY error is a Windows Blue Screen of Death (BSOD) stop code that occurs when a driver attempts to write data to a memory location that is marked as read-only.

Windows protects certain memory regions to prevent unauthorized modifications. When a kernel-mode driver or application attempts to modify protected memory, Windows detects the violation and stops the system to prevent further damage.

Advertisement

The error is commonly associated with driver-related programming problems, incompatible or faulty drivers, and memory corruption. However, the exact cause must be identified through crash dump analysis rather than assuming that a particular driver or hardware component is responsible.

Updating or rolling back recently changed drivers, checking newly installed hardware, examining crash dump files, and repairing Windows system files are useful troubleshooting steps.

What Is ATTEMPTED_WRITE_TO_READONLY_MEMORY (0x000000BE)?

ATTEMPTED_WRITE_TO_READONLY_MEMORY is a Windows bug check that indicates an attempt was made to modify a memory segment that does not permit write operations.

Windows uses memory protection mechanisms to control how different parts of the operating system, applications, and drivers access system memory.

Some memory regions are deliberately marked as read-only. This prevents software from modifying protected instructions, data, or other memory contents that must remain unchanged.

If a kernel-mode driver attempts to write to one of these protected regions, Windows can generate the 0xBE bug check and display a Blue Screen of Death.

According to Microsoft, the bug check is specifically issued when a driver attempts to write to a read-only memory segment.

Technical Information

Parameter Details
Stop Code 0x000000BE
Error Name ATTEMPTED_WRITE_TO_READONLY_MEMORY
Error Type Windows Bug Check / BSOD
Primary Indication A driver attempted to write to a read-only memory segment
Operating System Windows
Common Diagnostic Tool Windows Debugger (WinDbg)

What Causes the 0x000000BE Error?

The error indicates an invalid memory write operation, but it does not automatically identify the underlying reason. Several software and hardware-related conditions may contribute to the problem.

1. Faulty or Incompatible Device Drivers

A device driver allows Windows to communicate with hardware components such as graphics cards, network adapters, storage controllers, and other devices.

A defective driver, programming error, or compatibility problem can cause an invalid memory operation. If the driver attempts to modify protected memory, Windows may generate the 0xBE stop code.

2. Recently Updated Drivers

Installing a new driver or updating an existing one can sometimes introduce compatibility problems.

This may happen when:

  • A driver update contains a programming defect.
  • A newly installed driver is incompatible with the current Windows version.
  • An incorrect driver package is installed for the hardware.
  • A driver conflicts with another installed driver or system component.

If the BSOD started immediately after a driver update, investigate that driver first.

3. Graphics Driver Problems

Graphics drivers operate with elevated system privileges and interact closely with Windows memory management and display-related components.

An incompatible or defective graphics driver can contribute to system instability and memory-related errors.

Check the graphics driver, particularly if the error occurs while gaming, running graphics-intensive applications, watching videos, or using multiple displays. However, the presence of a graphics-related activity does not prove that the graphics driver is responsible.

4. Third-Party Security Software

Some antivirus, endpoint protection, encryption, and system monitoring applications install kernel-mode drivers to interact with Windows at a low level.

A defective or incompatible component of such software may contribute to memory access problems.

If the error began after installing or updating security software, investigate its driver compatibility and available updates before considering removal.

5. Memory Corruption

Corrupted memory contents can cause unexpected behaviour in drivers and other kernel-mode components.

Memory corruption may result from software defects or, in some cases, faulty hardware. A crash dump is useful for determining whether the observed memory operation is associated with a particular driver or whether further investigation is necessary.

6. Hardware or Firmware Compatibility Problems

Hardware problems are not the direct definition of this bug check, but unstable hardware or firmware can contribute to system instability and memory corruption.

Possible areas to investigate include:

  • Recently installed hardware.
  • Unstable RAM modules.
  • Incorrect memory overclocking or XMP settings.
  • Outdated motherboard BIOS or firmware.
  • Hardware compatibility problems.

Hardware replacement should not be the first response without supporting diagnostic evidence.

Symptoms of the ATTEMPTED_WRITE_TO_READONLY_MEMORY Error

When this bug check occurs, Windows may display a blue screen and automatically restart the computer.

Common symptoms include:

  • Windows displays a Blue Screen of Death with the stop code 0x000000BE.
  • The computer restarts unexpectedly.
  • The system crashes while starting Windows.
  • Blue screens occur while using particular applications.
  • The computer becomes unstable after installing a driver or software update.
  • Repeated crashes occur during normal system operation.
  • Crash dump files are generated in the Windows directory.

The exact symptoms depend on the component involved and the circumstances under which the invalid memory operation occurs.

How to Fix ATTEMPTED_WRITE_TO_READONLY_MEMORY (0x000000BE)

Follow the troubleshooting methods below in order. Start with the least disruptive checks and move to advanced diagnostics only when necessary.

1. Restart the Computer

If the error occurs only once, restart Windows and check whether the system operates normally.

A temporary system problem may not occur again after restarting. However, repeated BSODs should be investigated rather than ignored.

2. Disconnect Recently Installed Hardware

If the problem started after installing a new hardware component, disconnect that component and check whether Windows becomes stable.

Follow these steps:

  1. Shut down the computer completely.
  2. Disconnect recently installed external devices or peripherals.
  3. If appropriate, remove recently installed internal hardware after safely powering off the system.
  4. Start Windows again.
  5. Check whether the BSOD occurs again.

If disconnecting a particular device resolves the problem, investigate its driver, firmware, and hardware compatibility.

Note: Do not disconnect internal components while the computer is powered on.

3. Update or Roll Back Device Drivers

Driver troubleshooting is one of the most important steps for this stop code.

Open Device Manager to identify devices with driver warnings or recently changed drivers.

  1. Press Windows + X.
  2. Select Device Manager.
  3. Expand the relevant hardware categories.
  4. Look for devices displaying a yellow warning symbol.
  5. Right-click the suspected device and select Properties.
  6. Open the Driver tab.
  7. Check the driver provider, version, and installation date.

If the driver is outdated, obtain a compatible update from Windows Update or the hardware manufacturer's official support website.

If the problem started after installing a driver update, consider rolling back to the previous version:

  1. Open Device Manager.
  2. Right-click the affected device.
  3. Select Properties.
  4. Open the Driver tab.
  5. Select Roll Back Driver, if available.
  6. Follow the instructions and restart the computer.

Do not update or replace every driver randomly. Prioritize drivers that changed shortly before the first crash or are identified by crash dump analysis.

4. Start Windows in Safe Mode

If Windows repeatedly crashes during normal startup, Safe Mode can help isolate driver and software-related problems.

Safe Mode starts Windows with a limited set of drivers and services.

  1. Open Windows Recovery Environment (Windows RE).
  2. Select Troubleshoot.
  3. Open Advanced options.
  4. Select Startup Settings.
  5. Click Restart.
  6. After restarting, select the Safe Mode option.

If Windows operates normally in Safe Mode, investigate recently installed drivers, third-party software, and services that are not loaded in this mode.

Safe Mode does not prove that a particular driver is faulty. It is a diagnostic environment that helps narrow down the problem.

5. Repair Windows System Files Using DISM and SFC

Corrupted Windows system files can contribute to operating system instability. Microsoft provides DISM and System File Checker (SFC) to inspect and repair Windows components and protected system files.

Follow these steps:

  1. Open the Start menu.
  2. Search for Command Prompt.
  3. Right-click it and select Run as administrator.
  4. Run the following command:
DISM.exe /Online /Cleanup-image /Restorehealth

Wait until the operation completes successfully.

Next, execute:

sfc /scannow

Allow the verification process to reach 100% before closing the Command Prompt window.

Restart Windows after the scans are completed and check whether the problem persists.

Important: DISM and SFC repair Windows component and system-file problems. They do not directly repair a defective third-party device driver or faulty RAM.

6. Install Available Windows Updates

Microsoft periodically releases Windows updates containing security improvements, reliability fixes, and compatibility updates.

To check for available updates:

  1. Press Windows + I to open Settings.
  2. Select Windows Update.
  3. Click Check for updates.
  4. Install appropriate available updates.
  5. Restart the computer if required.

If the BSOD began immediately after a particular Windows update, investigate whether uninstalling that update or using an available recovery option is appropriate.

7. Check RAM for Memory Problems

Although 0x000000BE specifically indicates an attempted write to read-only memory, faulty RAM or memory instability may contribute to system crashes and corruption.

Windows Memory Diagnostic can help check for memory problems.

  1. Press Windows + R.
  2. Type mdsched.exe.
  3. Press Enter.
  4. Select Restart now and check for problems.
  5. Allow the memory diagnostic test to complete.
  6. Review the diagnostic results after Windows starts again.

If errors are reported, investigate the RAM modules, memory configuration, motherboard compatibility, and system stability.

A successful memory test does not completely rule out intermittent RAM or hardware problems.

8. Examine Crash Dump Files Using WinDbg

If the error continues, crash dump analysis is one of the most useful methods for identifying the component involved in the failure.

Windows may save crash dump files in the following locations:

  • C:\Windows\Minidump – Small memory dump files.
  • C:\Windows\MEMORY.DMP – A kernel or other configured memory dump, if generated.

Microsoft provides Windows Debugger (WinDbg) for examining these files.

Steps to Analyze the Crash Dump

  1. Install WinDbg from Microsoft's official distribution.
  2. Open WinDbg.
  3. Select the option to open a crash dump file.
  4. Browse to the relevant dump file in the Minidump directory or open the configured MEMORY.DMP file.
  5. Allow the debugger to load the necessary symbols.
  6. Enter the following command in the debugger command window:
!analyze -v

This command displays detailed information about the bug check, including its parameters and available diagnostic information.

Look for the following fields in the analysis output:

  • BUGCHECK_CODE: Confirms the bug check identifier.
  • BUGCHECK_P1 to BUGCHECK_P4: Displays the four bug check parameters.
  • MODULE_NAME: Identifies the module associated with the analysis.
  • IMAGE_NAME: Displays the relevant image filename when available.
  • FAILURE_BUCKET_ID: Provides a failure classification used during crash analysis.
  • Probably caused by: Displays the debugger's suggested cause, when available.

For this particular bug check, the first parameter represents the virtual address of the attempted write, the second contains the page table entry (PTE) contents, and the third and fourth parameters are reserved.

Microsoft also documents that, when the responsible driver can be identified, its name is printed on the blue screen and stored at the KiBugCheckDriver location.

Important: A module appearing in the crash report is not automatically the root cause. A Windows system module may be involved when another driver has corrupted memory or caused an invalid operation. Interpret the complete debugger output before replacing or removing system components.

9. Investigate Recently Installed Software

If the problem started after installing a new application, security product, hardware utility, or system-level monitoring tool, investigate whether it installed a kernel-mode driver.

Consider the following procedure:

  1. Identify software installed shortly before the first crash.
  2. Check whether the software has a newer compatible version.
  3. Review its official support documentation for known driver issues.
  4. If appropriate, temporarily uninstall the suspected application using its supported uninstallation procedure.
  5. Restart Windows and monitor system stability.

Make sure you understand the security implications before removing antivirus or endpoint protection software from a business computer.

10. Check BIOS and Firmware Compatibility

Outdated or incompatible firmware can contribute to hardware and system stability problems.

If the error persists after driver and memory diagnostics, check the motherboard or computer manufacturer's support website for relevant BIOS and firmware updates.

Before updating BIOS:

  • Confirm the exact computer or motherboard model.
  • Download firmware only from the manufacturer's official website.
  • Read the manufacturer's installation instructions.
  • Ensure reliable power during the update.
  • Do not interrupt the firmware update process.
  • Record existing BIOS settings before making changes.

Do not update BIOS without a relevant reason, and avoid changing memory timings, voltage, or overclocking settings as an initial troubleshooting measure.

Advanced Troubleshooting: Driver Identification

For IT professionals and experienced administrators, identifying the driver responsible for the invalid memory operation is preferable to making random system changes.

When a crash dump is available, examine the stack trace, module information, bug check parameters, and any driver-specific information reported by WinDbg.

For the 0xBE bug check, the KiBugCheckDriver information can be useful when Windows has identified the responsible driver.

Microsoft's WinDbg debugger and kernel debugging documentation provide additional information for analyzing Windows crash dumps.

Warning: Driver Verifier is an advanced Windows diagnostic utility that can deliberately trigger additional system crashes when it detects driver violations. Do not enable it casually on production computers or systems containing important unsaved work. Use it only when the responsible driver cannot otherwise be identified and recovery access is available.

How to Prevent the 0x000000BE Error

Although not every driver-related failure can be prevented, the following practices can reduce the possibility of recurring problems.

  • Install device drivers from Windows Update or the hardware manufacturer's official website.
  • Use drivers compatible with the installed Windows version and hardware.
  • Avoid unofficial driver packages and unknown driver update utilities.
  • Test significant driver updates before deploying them across business computers.
  • Keep Windows and supported firmware reasonably up to date.
  • Avoid unnecessary system-level modifications.
  • Do not use unstable memory overclocking or voltage settings.
  • Maintain regular backups of important business and personal data.
  • Investigate repeated BSOD errors using crash dump files.

Frequently Asked Questions (FAQs)

1. What does ATTEMPTED_WRITE_TO_READONLY_MEMORY mean?

It means a Windows driver attempted to write data to a memory region that is marked as read-only. Windows detects this invalid operation and generates bug check 0x000000BE to protect system stability.

2. Is 0x000000BE a hardware or software problem?

The bug check directly indicates an invalid memory write operation, typically involving a driver. A software or driver defect is an important area to investigate. However, memory corruption, faulty RAM, or hardware instability may also contribute to the problem.

3. Can a graphics driver cause ATTEMPTED_WRITE_TO_READONLY_MEMORY?

A defective or incompatible graphics driver can potentially contribute to this error. However, the graphics driver should only be considered responsible when crash dump analysis or other diagnostic evidence supports that conclusion.

4. Does this error mean my RAM is faulty?

No. The 0x000000BE stop code does not specifically indicate faulty RAM. It identifies an attempted write to protected memory. Run Windows Memory Diagnostic or an appropriate hardware memory test if there are additional indications of memory instability.

5. How can I identify the driver responsible for the error?

Examine the Windows crash dump using WinDbg and run !analyze -v. Review the module information, stack trace, bug check parameters, and available driver identification details. The KiBugCheckDriver information may also identify the responsible driver.

6. Can updating Windows fix the 0x000000BE BSOD?

It may help if the problem is associated with a Windows compatibility issue or a software defect addressed by an update. However, installing updates is not a guaranteed solution for every instance of this bug check.

7. What should I do if Windows keeps restarting with error 0x000000BE?

Try starting Windows in Safe Mode, investigate recently installed drivers and hardware, and examine available crash dump files. If necessary, use Windows Recovery Environment to access recovery options and restore the system to a previously stable state.

Conclusion

The 0x000000BE – ATTEMPTED_WRITE_TO_READONLY_MEMORY error indicates that a driver attempted to modify a protected read-only memory region.

Driver compatibility and programming problems are important areas to investigate, but the exact cause cannot be determined from the stop code alone. Checking recently changed drivers, examining crash dump files, running system diagnostics, and investigating memory stability can help identify the underlying issue.

For recurring crashes, prioritize crash dump analysis over repeatedly reinstalling Windows or replacing hardware without diagnostic evidence.

Official References

YOUR FEEDBACK

Was this guide useful?

Your answer helps us keep BISONKB accurate and practical.

Links are permitted only to published BISONKB articles.